Hi,
I'm using KDE, and when i insert a usb key. I can see the key on the desktop and on the media folder, but there is no Pop Up notification.
The services : MediaManager and Notification Daemon are launch.
The "Show pop Up notification" is check.
dmesg
|
Source code
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
|
[ 88.432992] usb 2-7.1: new full speed USB device using ehci_hcd and address 3
[ 88.542070] usb 2-7.1: configuration #1 chosen from 1 choice
[ 88.542696] usb 2-7.1: New USB device found, idVendor=0ed1, idProduct=6680
[ 88.542703] usb 2-7.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 88.542706] usb 2-7.1: Product: Mass Storage Device
[ 88.542708] usb 2-7.1: Manufacturer: Generic
[ 88.628429] Initializing USB Mass Storage driver...
[ 88.629224] scsi6 : SCSI emulation for USB Mass Storage devices
[ 88.629224] usb-storage: device found at 3
[ 88.629224] usb-storage: waiting for device to settle before scanning
[ 88.629224] usbcore: registered new interface driver usb-storage
[ 88.629224] USB Mass Storage support registered.
[ 95.111103] usb-storage: device scan complete
[ 95.263798] scsi 6:0:0:0: Direct-Access UFD 7.77 PQ: 0 ANSI: 2
[ 95.267798] sd 6:0:0:0: [sdb] 128000 512-byte hardware sectors (66 MB)
[ 95.312643] sd 6:0:0:0: [sdb] Write Protect is on
[ 95.312643] sd 6:0:0:0: [sdb] Mode Sense: 03 00 80 00
[ 95.312643] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 95.321784] sd 6:0:0:0: [sdb] 128000 512-byte hardware sectors (66 MB)
[ 95.325783] sd 6:0:0:0: [sdb] Write Protect is on
[ 95.325783] sd 6:0:0:0: [sdb] Mode Sense: 03 00 80 00
[ 95.325783] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 95.325783] sdb: sdb1
[ 95.333783] sd 6:0:0:0: [sdb] Attached SCSI removable disk
|
ps aux | grep hald
|
Source code
|
1
2
3
4
5
6
|
107 2774 0.1 0.4 5476 3380 ? Ss 10:57 0:00 /usr/sbin/hald
root 2775 0.0 0.1 3320 1056 ? S 10:57 0:00 hald-runner
root 2795 0.3 0.1 3384 1036 ? S 10:57 0:00 hald-addon-input: Listening on /dev/input/event2 /dev/input/event1 /dev/input/event0
107 2804 0.0 0.1 2272 876 ? S 10:57 0:00 hald-addon-acpi: listening on acpid socket /var/run/acpid.socket
root 3118 0.0 0.1 3384 1036 ? S 10:58 0:00 hald-addon-storage: polling /dev/sdb (every 2 sec)
root 3141 0.0 0.0 3144 760 pts/1 R+ 11:00 0:00 grep hald
|
ps aux | grep kded
|
Source code
|
1
2
|
user 3030 0.1 1.6 30944 12816 ? S 10:58 0:00 kded [kdeinit] --new-startup
root 3143 0.0 0.0 3144 760 pts/1 R+ 11:01 0:00 grep kded
|
Is there a way to make pop up notification working ?
Is there a way to open automatically konqueror when a key is insert ?