Dear visitor, welcome to KDE-Forum.org. If this is your first visit here, please read the Help. It explains in detail how this page works. To use all features of this page, you should consider registering. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.
Source code |
|
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 |
System ----------------------- K3b Version: 0.12.16 KDE Version: 3.5.1 Level "a" QT Version: 3.3.5 Kernel: 2.6.16.13-4-default Devices ----------------------- HL-DT-ST DVDRAM GMA-4080N 0H35 (/dev/sr0, /dev/sg1) at [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-RAM; DVD-R; DVD-RW; DVD+R; DVD+RW; DVD+R DL] [DVD-ROM; DVD-R Sequential; DVD-RAM; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD+R; DVD+R Double Layer; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Restricted Overwrite] Used versions ----------------------- cdrecord: 2.1 cdrecord ----------------------- [B]/usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler /usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority(). /usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns. /usr/bin/cdrecord: Warning: not running as root user, fs= option ignored.[/B] [U] Can that be the problem? I tried changing its permission to a+rwx but it comes back to 755 each time by itself when I go back in the setup k3b dialog box...[/U] scsidev: '1,0,0' scsibus: 1 target: 0 lun: 0 Linux sg driver version: 3.5.33 /usr/bin/cdrecord: Warning: using inofficial libscg transport code version (okir@suse.de-scsi-linux-sg.c-1.83-resmgr-patch '@(#)scsi-linux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling'). SCSI buffer size: 64512 /usr/bin/cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code. /usr/bin/cdrecord: If you need DVD-R/DVD-RW support, ask the Author for cdrecord-ProDVD. /usr/bin/cdrecord: Free test versions and free keys for personal use are at ftp://ftp.berlios.de/pub/cdrecord/ProDVD/ Cdrecord-Clone 2.01 (i686-suse-linux) Copyright (C) 1995-2004 Jörg Schilling Note: This version is an unofficial (modified) version Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to http://bugs.opensuse.org/ Note: The author of cdrecord should not be bothered with problems in this version. TOC Type: 0 = CD-DA Using libscg version 'schily-0.8'. Driveropts: 'burnfree' atapi: 1 Device type : Removable CD-ROM Version : 5 Response Format: 2 Capabilities : Vendor_info : 'HL-DT-ST' Identifikation : 'DVDRAM GMA-4080N' Revision : '0H35' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x0009 Profile: 0x0012 Profile: 0x0011 Profile: 0x0014 Profile: 0x0013 Profile: 0x001A Profile: 0x001B Profile: 0x002B Profile: 0x0010 Profile: 0x0009 (current) Profile: 0x000A Profile: 0x0008 Profile: 0x0002 Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1053696 = 1029 KB Drive DMA Speed: 13165 kB/s 74x CD 9x DVD FIFO size : 4194304 = 4096 KB pregap1: -1 Track 01: audio 86 MB (08:35.01) no preemp copy Track 02: audio 56 MB (05:38.24) no preemp copy Track 03: audio 57 MB (05:42.16) no preemp copy Track 04: audio 45 MB (04:29.69) no preemp copy Track 05: audio 37 MB (03:41.97) no preemp copy Track 06: audio 46 MB (04:35.54) no preemp copy Track 07: audio 47 MB (04:43.72) no preemp copy Track 08: audio 32 MB (03:10.85) no preemp copy Track 09: audio 41 MB (04:04.38) no preemp copy Track 10: audio 46 MB (04:35.96) no preemp copy Track 11: audio 33 MB (03:19.34) no preemp copy Track 12: audio 32 MB (03:14.06) no preemp copy Track 13: audio 44 MB (04:26.40) no preemp copy Track 14: audio 46 MB (04:35.25) no preemp copy Total size: 659 MB (65:18.61) = 293896 sectors Lout start: 659 MB (65:20/46) = 293896 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 4 Is not unrestricted Is not erasable Disk sub type: Medium Type A, low Beta category (A-) (2) ATIP start of lead in: -12508 (97:15/17) ATIP start of lead out: 359845 (79:59/70) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 22 Manufacturer: Ritek Co. Blocks total: 359845 Blocks current: 359845 Blocks remaining: 65949 Starting to write CD/DVD at speed 24 in dummy TAO mode for single session. Last chance to quit, starting dummy write in 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. BURN-Free is ON. Starting new track at sector: 0 Track 01: 0 of 86 MB written. Track 01: 1 of 86 MB written (fifo 100%) [buf 99%] 1.1x. /usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 02 1C 00 00 1B 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 10 2A 30 02 80 21 02 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0 Sense flags: Blk 0 (not valid) resid: 63504 cmd finished after 0.016s timeout 40s /usr/bin/cdrecord: The current problem looks like a buffer underrun. /usr/bin/cdrecord: It looks like 'driveropts=burnfree' does not work for this drive. /usr/bin/cdrecord: Please report. /usr/bin/cdrecord: Make sure that you are root, enable DMA and check your HW/OS set up. write track data: error after 1270080 bytes Writing time: 13.459s Average write speed 292.9x. Min drive buffer fill was 99% Fixating... WARNING: Some drives don't like fixation in dummy mode. Fixating time: 28.666s /usr/bin/cdrecord: fifo had 84 puts and 21 gets. /usr/bin/cdrecord: fifo was 0 times empty and 6 times full, min fill was 87%. cdrecord command: ----------------------- /usr/bin/cdrecord -v gracetime=2 dev=1,0,0 speed=24 -tao -dummy driveropts=burnfree -eject -useinfo -audio -shorttrack /tmp/kde-matt/k3b_audio_0_01.wav /tmp/kde-matt/k3b_audio_0_02.wav /tmp/kde-matt/k3b_audio_0_03.wav /tmp/kde-matt/k3b_audio_0_04.wav /tmp/kde-matt/k3b_audio_0_05.wav /tmp/kde-matt/k3b_audio_0_06.wav /tmp/kde-matt/k3b_audio_0_07.wav /tmp/kde-matt/k3b_audio_0_08.wav /tmp/kde-matt/k3b_audio_0_09.wav /tmp/kde-matt/k3b_audio_0_10.wav /tmp/kde-matt/k3b_audio_0_11.wav /tmp/kde-matt/k3b_audio_0_12.wav /tmp/kde-matt/k3b_audio_0_13.wav /tmp/kde-matt/k3b_audio_0_14.wav |
Forum Software: Burning Board®, developed by WoltLab® GmbH
Linux Computer - Linux Forum -
Linux Computer und Notebooks - Lastminute - Wasserbetten & Whirlpools